Introducing Your New VoIP Phones

New VoIP Phones

The firm is in the process of upgrading our phone system after decades of use from our existing PBX. We have decided to move to a Voice over IP (VoIP) phone system.  Essentially, that means instead of using traditional phone lines and equipment, your phones operate on the same Ethernet cable used by your computer.  Calls can go out using either the Internet or a private computer network that connects back to Vonage (formerly iCore) where it connects to the other party using whatever phone system is being used on the other end.

VoIP has been around for many years and is now the norm for most businesses.  It is more efficient, can provide better sound quality, and provides you with many more features than traditional phones. Many businesses delayed moving to VoIP because of call quality issues.  When making a call on the Internet, delays of even a fraction of a second can greatly hurt call quality.  For this reason, we have installed an internal private line to most of our offices that will ensure call quality of service back to the phone vendor's main connection.

Everyone who currently has a direct dial number will keep that number.  None of that will change. Some people within the firm do not have direct dials at present.  Under the new system, they will. Because of this, some 4 digit extensions may change to make them consistent with the direct dial numbers that we get for those people.  We will also maintain everyone's existing extension as a alternate extension.  So if you have someone's extension memorized, you will still be able to reach them using that old extension, as well as the new one.

The new phone system comes with a wide variety of features that I will address in upcoming posts over the next few weeks.  Today's post will focus on the phone itself.

All existing landline phones in the firm will be replaced by a new Polycom VVX 410 Business Media phone.  It works much like your current phone, but there will be a few changes.

Vonage has provided this Quick Start Guide, which you may fine helpful.

Making a Call:

Currently, in most offices, you must press an outside line button or dial "9" to get an outside line. That is going away.  With the new system, you dial the area code and number.  No need to dial a "1" either.  You must dial an area code, even for local calls.  Dial 10 digits, and the phone should start ringing.  If you dial a four digit extension, you must then hit the "dial" button to complete the call.

You also have the ability to assign speed dials to up to 11 numbers.  These will show up on the LCD screen on the phone.  Once configured, just press the button next to the person you wish to call and it starts ringing.

The Firm's directory is also available on the main screen.  If you do not know a number, just scroll until you find it and select that number.

Receiving a call:

No real changes  here: You can simply pick up the receiver and start talking, or press the speaker button and talk through the speaker.  There is also a button for a headset usage.  We don't expect many people to use this, but if interested, let me know.  Personally, I find the speaker works just as well as a headset.

Transferring a call:

There are three ways to transfer.

1. Consultative Transfer.  This is where you want to speak with the recipient before transferring.
1. Press the "transfer" button (button with two hand sets to the left of your number pad)
2. Dial the recipient's extension and wait for them to answer.  You may announce who is calling and ask if they want to speak to the caller.
3. If yes, just press "transfer" again and hang up.  If no, you should see a "cancel" option on your screen.  Press the button under cancel and you are speaking with the original caller again.
2. Blind Transfer: This simply transfers the call straight to the recipient without any discussion.
1. Press the transfer button
2. Press the button under "blind" on your screen.
3. Dial the recipient's extension.
4. Press transfer and hang up.
3. Transfer to Voicemail
1. Press Transfer
2. Dial *55
3. Dial the recipient's extension
4. Press # and hang up.

We have a Transfer Quick Tips Sheet, which basically spells out what I said above, that you can also review or save for future reference.

Three way calling:

When speaking with one party, you should see an option for "Confrnc" on your screen (if not, press the button under "more").  Press the button under confrnc and call the third party.  You can then speak with that party alone, then press confrnc again to join all three of you on a single call.  You cannot have more the three parties (including yourself) on a call unless you are using one of the conference room speaker phones.  However, if there are two or more people in our office on the call, each of then can conference in one other party and have everyone speak together.

Getting Help:

For a more detailed presentation of the phone's features, you may also find this PowerPoint presentation helpful.

Of course the Help Desk is always available to provide assistance.  Please keep in mind that we are still learning some of this as well, so please be patient with use. Our main focus right now is just getting everyone set up with the basics.

The other option for help is the iCore Help Desk.  Dial 611 on your new phone and you will be connected to them.  They should be able to answer your questions or help you make any changes you need.

Stay tuned for more:

I will be posting several more blog posts over the next few days that will help you with additional information on some of the other things you can do with your new phones.